Civil Engineer

What will I do in this position if hired? In this position you will be performing engineering services to reduce exposure of property and persons to natural hazards through review and implementation of specialized programs and studies, as well as dissemination of technical assistance and information.

Typical assignments include: Serving as a regional expert on current technology used for the Risk MAP initiative, including two-dimensional modeling, Light Detection and Ranging (LiDAR) remote sensing, Hazus flood loss estimation tools, and incorporates advances in the new technologies into Risk MAP studies.

Providing expert technical direction to contractors' Study Managers conducting flood risk studies and Risk MAP Program mapping.

Formulating guidelines and specifications for the planning and engineering aspects of flood, mudslide, and erosion studies to ensure that flood risk studies will provide a sound basis for insurance rating and floodplain management measures. What else do I need to know?

At FEMA, our mission is to help people before, during and after disasters, and every employee at FEMA has a role in emergency management. Every FEMA employee has regular and recurring emergency management responsibilities, though not every position requires routine deployment to disaster sites.

All positions are subject to recall around the clock for emergency management operations, which may require irregular work hours, work at locations other than the official duty station, and may include duties other than those specified in the employee's official position description.

Travel requirements in support of emergency operations may be extensive in nature (weeks to months), with little advance notice, and may require employees to relocate to emergency sites with physically austere and operationally challenging conditions.

The qualification requirements listed below must be met by the closing date of this announcement.

To qualify for this position at the GS-12 level, you must possess one full year of specialized experience equivalent to at least the GS-11 level in the Federal government, which has equipped you with the skills needed to successfully perform the duties of the position.

Experience may be obtained in the federal government, a state or local government, or private sector, and must demonstrate the following: Implementing procedures regarding flood risk mapping of the National Flood Insurance Program (NFIP), to include communications and programmatic support of flood risk projects; AND Utilizing systems (i.e., Geographic Information System (GIS) or Hydrology and Hydraulics Modeling) to support flood risk studies.

Providing advice on theories, principles, practices, and techniques of natural flood hazard risk identification to leadership and external stakeholders. In addition to the Minimum Qualifications requirement listed above, you must meet the education or combination of education/experience listed below under Basic Requirements.

Submission of transcript is required. Unofficial transcript is acceptable at time of application. Official transcript will be required if selected. Basic Requirements A. Degree: Engineering.

To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress­ strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR B.

Combination of education and experience college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.

The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.

Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration.

For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2.

Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3.

Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A.

The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4.

Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance.

Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Please read the following important information to ensure we have everything we need to consider your application: Do not copy and paste the duties, specialized experience, or occupational assessment questionnaire from this announcement into your resume as that will not be considered a demonstration of your qualifications for this position.

Your resume serves as the basis for experience related qualification determinations, and you must highlight your most relevant and significant work experience and education (if applicable), as it relates to this job opportunity. Please use your own words, be clear, and specific when describing your work history.

We cannot make assumptions regarding your experience. Are you qualifying based on your work experience? Qualifications are based on your ability to demonstrate in your resume that you possess one year of the specialized experience for this announcement at a comparable scope and responsibility.

To ensure all of the essential information is in your resume, we encourage you to use the USAJOBS online Resume Builder.

If you choose to use your own resume, it must contain the following information organized by experience/position: (1) job title, (2) name of employer, (3) start and end dates of each period of employment (from MM/DD/YY to MM/DD/YY), (4) detailed description of duties performed, accomplishments, and related skills, and (5) hours worked per week (part-time employment will be prorated in crediting experience).

Federal experience/positions must also include the grade level, occupational series and dates in which you held each grade level. Are you a current or former FEMA Reservist/Disaster Assistance Employee (DAE)?

To accurately credit your experience from intermittent positions and Reservist Deployments, you must list the dates (from MM/DD/YY to MM/DD/YY) of deployments that are relevant to your qualifying experience, along with the job title and specific duties you were responsible for during each deployment.

Determining length of General or Specialized Experience is dependent on the above information. Failure to provide the above information in your resume may result in your application being found "not qualified.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social).

Volunteer work helps build critical competencies, knowledge, and skills, and provides valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

For additional information on crediting experience and/or education, please reference the OPM General Schedule Qualification Standards.